• Antifriction bearing/ Roller bearing

  Antifriction bearing/ Roller bearing

  • Moba HT EP 2
    Li-complex soap
    For high-pressure-loaded friction- and roller bearing at increased bearing temperature
     -30  +150°C
  • Moba MZ EP2
    Lithium Soap
    Multipurpose grease with high load carrying capacity
     - 30  +120°C
  • Moba PH 2/3
    Polyurea
    High temperature grease for the lubrication of high-impact loaded rolling and sliding bearings at high bearing temperatures
     -40  +190°C
  • TA-Wälzerit
    Aluminium complex
    Lubrication of rolling and sliding bearings at high bearing temperatures and high loads, even under dusty and humid conditions
     -20  +150°C
  • Wälzerit BioCa-2
    Special-Calcium soap
    Special grease on biodegradable nativ ester, suit for lubrication of roller and friction bearings
     -20  +80°C
  • Wälzerit BioCa-EP2
    Calcium saponified
    For the lubrication of heavily loaded plain, roller bearings and open gears
     -20  + 80°C
  • Wälzerit BioLi EP2
    Lithium Soap
    For rolling and plain bearings lubrication under high  and intermittent loads
     - 35  + 130°C
  • Wälzerit K2K
    Lithium Soap
    Multipurpose grease
     - 30  + 120°C
  • Wälzerit K3K
    Lithium Soap
    Multi-purpose grease for rolling and plain bearings lubricated with good seal
     - 25  + 140°C
  • Wälzerit LC-EP
    Li-Ca Soap
    Lubrication of rolling and sliding bearings at high shock loads under the influence of moisture
     - 30  + 130°C
  • Wälzerit PHPO-Z
    Polyurea
    High temperature grease for long-term lubrication of rolling and plain bearings, lubrication temperature-load bearings in furnaces
     -30  +180°C
  • Wälzerit PRSE/S
    Lithium Soap
    Lubrication of rolling and sliding bearings at high shock loads and vibrations.
     - 30  + 130°C
  • Wälzerit Special
    Calcium saponified
    Lubrication of rolling and plan bearings under humid conditions (including salt water), intermittent pressure loading and vibration
     - 30  + 110°C
• Bearing lubrication

  Bearing lubrication

  • MoS₂ Assembly paste
    Running in lubricant for bearing and gear transmission, as an assembly paste for heavily loaded slideway and fit of antifriction bearing
    -30 +450°C
  • Moba LZ M2
    Lithium Soap
    Longlife grease even under rough operating conditions
     - 30  + 140°C
  • Wälzerit PRTS
    Lithium Soap
    Longlife grease even under rough operating conditions, high load carrying capacity, high temperature resistance
     - 30  + 140°C
  • Wälzerit WR 2
    Ca-Sulfonate-Complex
    Multi-purpose extreme pressure grease, dust and humidity conditions suitable for
     - 25 + 180 °C
• Biodegrable grease

  Biodegrable grease

  • Thread grease BioCa 2
    Calcium saponified
    Special thread grease with high pressure load capacity, based on biodegradable oil
     - 20  + 120°C
  • Wälzerit Bio Ca-EP 2
    Calcium saponified
    For lubrication of low-speed rolling and plain bearings
     -15  + 80°C
  • Wälzerit BioLi EP2
    Lithium Soap
    For rolling and plain bearings lubrication under high and intermittent loads
     - 35  + 120°C
• Brass-Copper-Forming / Pressing fat

  Brass-Copper-Forming / Pressing fat

  • Pressing Grease STN
    Bentonite gel
    Pressing fat on mineral oil containing 7%graphite
    NLGI-Grade:1
  • Pressing Grease T25
    Bentonite gel
    Pressing fat on mineral oil with a very high proportion of >20% graphite
    NLGI-Grade:1
  • Pressing Grease T40 G
    Bentonite gel
    Pressing fat on mineral oil containing 8% graphite
    NLGI-Grade:1
  • Pressing Grease T40N
    Bentonite gel
    Pressing fat on mineral oil containing 4% graphite
    NLGI-Grade:0
• Construction machinery / Mining

  Construction machinery / Mining

  • Moba LZ M2
    Lithium Soap
    Longlife grease even under rough operating conditions
     - 30  + 140°C
  • Moba MZ EP2
    Lithium Soap
    Multipurpose grease with high load carrying capacity
     - 30  + 120°C
  • Wälzerit K2K
    Lithium Soap
    Multipurpose grease
    -30 +120°C
  • Wälzerit PRTS
    Lithium Soap
    Longlife grease even under rough operating conditions, high load carrying capacity, high temperature resistance
     - 30  + 140°C
  • Moba HT EP 2
    Li-complex soap
    For high-pressure-loaded friction- and roller bearing at increased bearing temperature
     - 30  + 150°C
• Gear box

  Gear box

  • Gear Lubricating Grease EP-0
    Lithium Soap
    Gear lubrication grease for filling of gearboxes of spur, bevel  and worm gears
     - 40  + 120°C
  • Moba HT FL 00
    Li-complex soap
    High-temperature liquid grease for gearboxes of spur, bevel  and worm gears
     -30 +150 °C
  • Moba LZ M2
    Lithium Soap
    Longlife grease even under rough operating conditions
     - 30  + 140°C
  • Moba MZ EP2
    Lithium Soap
    Multipurpose grease with high load carrying capacity
     - 30  + 120°C
  • Wälzerit BioCa EP2
    Calcium saponified
    For the lubrication of heavily loaded plain, roller bearings and open gears
     -20  + 80°C
  • Wälzerit NVP
    Natrium Soap
    For the lubrication of industrial gears
     -30 +100 °C
• High temperature lubricant

  High temperature lubricant

  • Gradislub SM
    Dry lubricant, colloidal dipersion of grahite in water
    +100 to +600°C
  • Moba HT EP 2
    Li-complex soap
    For high-pressure-loaded friction- and roller bearing at increased bearing temperature
     - 30  + 150°C
  • Moba HT FL 00
    Li-complex soap
    High-temperature liquid grease for extreme pressure,
     - 30  + 150°C
    NLGI-Grade: 00
  • MoS₂ Assembly Paste
    Running in lubricant for bearing and gear transmission, as an assembly paste for heavily loaded slideway and fit of antifriction bearing
    -30 +450°C
  • T-Wälzerit
    Bentonite grease
    Hot-bearing grease for the lubrication of rolling and sliding bearings at high bearing temperatures as in rotary furnaces, charging crane at steel works
     - 15  + 150°C
  • TA-Wälzerit
    Aluminium complex
    Lubrication of rolling and sliding bearings at high bearing temperatures and high loads, even under dusty and humid conditions
     -20  +150°C
  • TA-Wälzerit G
    Paste
    For bearing lubrication in continuous furnaces (LOI  GmbH), heavy duty pressure and temperature, contain graphite
     -20  +150°C
  • Wälzerit HTF 250
    PTFE
    Can be used in high loaded friction bearing, roller bearing with high thermal load, BAM tested for use in oxygen valves
    NLGI-Grade: 2
     -40  +260°C
  • Wälzerit HTF 250-II
    PTFE
    Can be used in high loaded friction bearing, roller bearing with high thermal load,
    NLGI-Grade: 2
     -30  +260°C
  • Wälzerit HTF 250-II-1
    PTFE
    Can be used in high loaded friction bearing, roller bearing with high thermal load,
    NLGI-Grade:1
     -30  +260°C
  • Wälzerit LK-TF/S
    Li-complex soap
    Soap grease with Teflon for the lubrication of high pressure loaded roller and plain bearings at elevated storage temperatures
     - 25 + 150 °C
  • Wälzerit PHPO-Z
    Polyurea
    High temperature grease for long-term lubrication of rolling and plain bearings, lubrication temperature-load bearings in furnaces
     -30  +180°C
• Liquid grease

  Liquid grease

  • Moba HT FL 00
    Li-complex soap
    High-temperature liquid grease with high pressure load capacity and extremely resistant to oxidation
    -30 +150°C
  • Li-Flow Grease 00
    Lithium Soap
    Suitable for central lubrication systems of units operating in the open
    -50 +120°C
• Longlife grease

  Longlife grease

  • Wälzerit PRTS
    Lithium Soap
    Longlife grease even under rough operating conditions, high load carrying capacity, high temperature resistance
     - 30  + 140°C
  • Moba LZ M2
    Lithium Soap
    MoS₂-longlife grease, even under rough operating conditions, high load capacity, high temperature resistance
     - 30  + 140°C
• Low-temperature grease

  Low-temperature grease

  • Moba TT EP2
    Li-complex soap
    Low-temperature grease for the lubrication of high pressure loaded roller and plain bearings
     -60   +140°C
  • Wälzerit EP 22
    Li-complex soap
    Multipurpose grease for the lubrication of high-speed bearings, high load carrying capacity
     - 50  + 150°C
• Multipurpose grease

  Multipurpose grease

  • Wälzerit K2K
    Lithium Soap
    Multipurpose grease
    -30  +120°C
  • Wälzerit K3K
    Lithium Soap
    Multipurpose grease for rolling and plain bearings lubricated with a good seal
    -20  +140°C
  • Moba MZ EP2
    Lithium Soap
    Multipurpose grease with high load carrying capacity
    -30  +120°C
  • Wälzerit WR 2
    Ca-Sulfonate-Complex
    Multipurpose extreme pressure grease, dust and humidity conditions suitable for
    -25  +180°C
  • Wälzerit PRSE/S
    Lithium Soap
    Lubrication of rolling and sliding bearings at high shock loads and vibrations.
    -30  +130°C
  • Wälzerit LC-EP
    Li-Ca-Soap
    Lubrication of rolling and sliding bearings at high shock loads under the influence of moisture
    -30  +130°C
• Open gear grease / Girth gear drives

  Open gear grease / Girth gear drives

  • Priming lubricant
    • Moba G Comp 1-2         
      Al-complex         
      Graphite compound for lubrication of loaded gears, gear racks, toothed edges, mechanical fill the so called "roughness valleys"
      -20  +250°C
  • Running-in-lubricant
    • Moba GS 500-00
      Al-complex
      NLGI- Grade: 00 / base oil viscosity at 40°C: 500 mm²/s
      - 20  + 200°C
  • Service lubricant
    • Moba GS 500-0
      Al-complex
      NLGI- Grade: 0 / base oil viscosity at 40°C: 500 mm²/s
      - 20  + 200°C
      Very high thermal-pressure resistance
    • Moba GS 1000-0
      Al-complex
      NLGI- Grade: 0 / base oil vicosity at 40°C: 1000 mm²/s
      - 20  + 200°C
      Very high thermal-pressure resistance
    • Moba GS 2500-0
      Al-complex
      NLGI- Grade: 0  / base oil vicisity at 40°C: 2500 mm²/s
      - 20  + 200°C
      Very high thermal-pressure resistance
• Rotary kiln / Continuous furnace

  Rotary kiln / Continuous furnace

  • Moba GS 1000-0
    Aluminium complex
    NLGI- Grade: 0 / base oil vicisity at 40°C: 1000 mm²/s
     - 20  + 200°C
  • Moba GS 2500-0
    Aluminium complex
    NLGI- Grade: 0  / base oil vicisity at 40°C: 2500 mm²/s
     - 20  + 200°C
  • Moba GS 500-0
    Aluminium complex
    NLGI- Grade: 0 / base oil vicisity at 40°C: 500 mm²/s
     - 20  + 200°C
    suitable for automatic spray lubrication contains graphite
  • Moba GS 500-00
    Aluminium complex
    NLGI- Grade:00 / base oil vicisity at 40°C: 500 mm²/s
     - 30  + 200°C
  • Wälzerit PHPO-Z
    Polyurea
    High temperature grease for long-term lubrication of rolling and plain bearings, lubrication temperature-load bearings in furnaces
     -30  +180°C
  • T-Wälzerit
    Bentonite grease
    Hot-bearing grease for the lubrication of rolling and sliding bearings at high bearing temperatures as in rotary furnaces, charging crane at steel works
     - 15  + 150°C
  • TA-Wälzerit G
    Aluminium complex
    for bearing lubrication in continuous furnaces (LOI  GmbH), heavy duty pressure and temperature, contain graphite
     - 20  + 150°C
  • Gradislub SM
    Colloidal dipersion of grahite in water
    dry lubricant  +100°C to +600°C, designed for rotatory kiln loose tyres
• Running in lubricant

  Running in lubricant

  • MoS₂ Assembly Paste
    running in lubricant for bearing and gear transmission, as an assembly paste for heavily loaded slideway and fit of antifriction bearing
  • Moba G Comp 1-2
    Aluminium complex
    Graphite compound for lubrication of loaded gears, gear racks, toothed edges, running in lubricant- mechanical fill the so called "roughness valleys"
• Wheel flange/ Switch lubrication

  Wheel flange/ Switch lubrication

  • Wheel Flange Grease SE-108
    Lithium saponified flow-grease, based on biodegrable synthetic oil. It contains very fine graphite.
    Suited for wheel flange lubrication, satisfies the requirement of wheel flange lubrication systems made by the company DELIMON.
     - 30 + 120 °C
  • Wheel Flange Grease SE-108 R
    Lithium saponified flow-grease, based on biodegrable synthetic oil. It contains very fine graphite.
    Suited for wheel flange lubrication, satisfies the requirement of wheel flange lubrication systems made by the company REBS.
     - 30 + 120 °C
  • Switch Lubricant- S
    Lithium Soap
    to lubricate switches and contact surfaces of course, resistant to UV radiation
     - 40 + 120 °C
• Spray lubricating grease

  Spray lubricating grease

  • Moba GS 500-0
    Aluminium complex
    NLGI- Grade 0
  • Moba GS 500-00
    Aluminium complex
    NLGI- Grade 00
  • Moba GS 1000-0
    Aluminium complex
    very high pressure resistance, high thermal stability,
    NLGI- Grade 0
  • Moba GS 2500-0
    Aluminium complex
    suitable for automatic spray lubrication, contains graphite
    NLGI- Grade 0
• Thread grease

  Thread grease

  • API Grease
    API BUL 5A3
    High pressure- thread grease corresponds to the prescription API BUL 5 A 3 of the American Petroleum Institute (API)
     - 20  + 150°C
  • Thread Grease BioCa-2
    Calcium saponified
    Sealing of threads on pipe fittings, high pressure resistance, easily biodegradable
     - 20  + 120°C

Oils

• Adhesive lubricant

  Adhesive lubricant

  Black, water-and pressure-resistant adhesive lubricants
  Special petroleum fractions (containing bitumen) for lubrication and preservation of track slats, ropes and chains.

  • Zählit LM
    Release for forging hammer of Beche & Grohs
    Viscosity 50°C approx. 217 mm²/s
    Designation DIN 51 513: BA
  • Zählit LM-35
    Viscosity 50°C approx. 385 mm²/s
    Designation DIN 51 513: BA
  • Zählit 4
    Sharing for the lubrication of Lasco forging- and sledge hammers
    Viscosity 50°C approx. 352 mm²/s
    Designation DIN 51 513: BA
  • Zählit 0/F
    Viscosity 50°C approx. 1.000 mm²/s
    Designation DIN 51 513: BB
  • Zählit D
    Viscosity 50°C approx. 16.000 mm²/s
    Designation DIN 51 513: BC
• Chain oil

  Chain oil

  • Mineral oil based

  • Synthetic oil, based on Polyglycol (PG )- special for use chain lubrication shrink tunnel and furnaces of company HALBACH.

  • Synthetic oil, based on Polyalphaolefin (PAO)
• Compressor oil

  Compressor oil

  Mineral oil based
  Designation: DIN 51506 VDL
  ISO viscosity class  32 - 150

• Heat transfer oil / Mineral oil
  • Heat transfer oil / Mineral oil

    Heat transfer oil / Mineral oil

    • Molson 980
      Viscosity (40°C) 475 mm²/s
      Release Andritz Küsters 096.600/27 HOT-S-ROLL 250
      Release Andritz Küsters 096.600/33 HOT-S-ROLL 250-Steel roll combination
      Release Andritz Küsters 096.600/28 HOT-S-ROLL 275
    • Molson 100
      Viscosity (40°C) 97 mm²/s
      Release Andritz Küsters 096.600/26 HOT-S-ROLL 200
      Release Andritz Küsters 096.600/34 HOT-S-ROLL 200-Steel roll combination
    • Molson 30
      Viscosity (40°C) 30,7 mm²/s
      Release Andritz Küsters 096.600/31 Steel roll-calender
  • Heat transfer oil / Synthetic oil , based on Polyglycole

    Heat transfer oil / Synthetic oil , based on Polyglycole

    • Molsyn 1000-M
      Viscosity (40°C)1000 mm²/s
      Release Andritz Küsters 096.600/24 S-Roll 170 (closed system)   
• Hydraulic oil

  Hydraulic oil

  Hydraulic fluids to the international ISO and DIN standards
  HLP / HLP-D / HVLP

• Industrial gear oil
  • Industrial gear oil / Mineral oil

    Industrial gear oil / Mineral oil

    • GEKA
      32 - 680  ISO VG
      DIN 51517-3: CL / CKB
    • GEKA-EP
      32 - 680  ISO VG
      DIN 51517-3: CLP / CKC
  • Industrial gear oil / Synthetic (PAO)

    Industrial gear oil / Synthetic (PAO)

    • GEAR- HP
      220 - 680 ISO VG
      DIN 51517-3: CLP-HC / CKS
      Fully synthetic high performance gear oils, based on PAO
  • Industrial gear oil / Synthetic(PG)

    Industrial gear oil / Synthetic(PG)

    • MOLSYN
      32- 1000 ISO VG
      Fully synthetic high performance lubricating oils, based on polyglycol
    • MOLSYN 150 / 220 / 320 / 460 / 680-M / 1000-M
      Release Andritz Küsters 096.600/23
    • MOLSYN 220 EP / 460-M
      ISO VG 220 / 460
      Release KKA-Kleinewefers for use in plastic-calenders-bearings
    • MOLSYN 1000M-EP
      ISO VG 1000
      • Release Krupp Polysius Ref. No 82 for use in cement-roll mills (operating oil)
      • Used for the lubrication of bearings in plastic calenders (Kleinewefers)
    • MOLSYN 1500-M
      ISO VG 1500
      Release Krupp Polysius Ref. No 83 for use in cement-roll mills (operating oil) ISO VG 1500
    • Spülmolsyn-M
      Release Krupp Polysius Ref. No 84 for use in cement roller mills (flushing oil)
    • MOLSYN 320M-EP
      ISO VG 320
      Suitable for use in paper machine applications (FAG FE8 test run failed)
• Slideway oil

  Slideway oil

  • GeKa EBG
    Demulsifying slideway oil with very good anti-stick-slip properties.
    Designation DIN 51517: C GLP
    ISO VG 46 / ISO VG 68 / ISO VG 220
  • GeKa EBG- Z 4
    Guide way oil with special adhesive capacity (lubrication saw frame and so called "Bär"-slideway of forging hammer).
    ISO VG 460
  • GeKa EBG- Z 320
    Guideway oil with special adhesive capacity (lubrication saw frame and so called "Bär" slideway of forging hammer).
    ISO VG 320
• Transformer oils

  Transformer oils

  • High quality, non-inhibited insulating oil based on mineral oil
    According to IEC 60296 (03)
  • High quality, inhibited insulating oil based on mineral oil
    According to IEC 60296 (03)

Lubricant Metalworking

• Cooling lubricant / insoluble in water

  Cooling lubricant / insoluble in water

  • Drilling oil / cutting oil

    Drilling oil / cutting oil

    • Boring Oil-28 S
      Low-emission, low-viscosity deep hole drilling oil
      Deep hole drilling with all common drilling methods, , also be used as honing oil
    • Cutting Oil-13 H
      Chlorine-free EP-cutting oil for threading and tapping. Also be used
      for heavy turning, milling and broaching of steel.
    • Cutting Oil-MB/SM
      High Performance Oil,heavy deep drilling operations and broaching
      chromium steel, chrome nickel steel, chrome molybdenum steel, steel casting
  • Punching oils / fineblanking
    • Aluminium

      Aluminium

      Punching Oil- 22
      Thin liquid, evaporating punching oil for forming process with high speed.
      Machining of Aluminum up to 8 mm materials strength.

    • Steel

      Steel

      • Punching Oil- 30
        Fine punching and deep drawing oil  with extremely pressure capacity for robust multi stage drawn parts, chlorinated.
        High-strength steels and non-ferrous metals up to 3mm sheet strenghth
      • Punching Oil-34
        Suitable for fineblanking and punching of steel in fine cutting quality.
      • Punching Oil-57
        Evaporating special coolant for stamping of thin sheet about steel
      • Punching Oil- 66
        Extremely high-alloy special oil for drawing, stamping and fine blanking
        Punching of alloy steel plates, precision cutting high alloy heavy workable steel profiles.
    • Non-ferrous metals

      Non-ferrous metals

      Punching Oil-30
      Fine punching and deep drawing oil  with extremely pressure capacity for robust multi stage drawn parts, chlorinated.
      Machining of high-strength steels and non-ferrous metals up to 3mm sheet strenghth.

  • Drawing oil
    • Stainless Steel

      Stainless Steel

      • Drawing Oil- 08 S
        Chlorine-free, washable drawing and deep drawing oil, machining steels, also high-alloyed.
        Deep drawing of sheet, drawing of bars and profiles, proven in multi-level tools of drawing and ironing operations.
      • Drawing Oil-436 S
        Chlorine-free drawing and calibration oil.
        Machining of stainless steel tube up to 3 mm wall thickness.
        Suitable for pulling ring and cram lubrication.
    • Steel

      Steel

      • Drawing Oil-08 S
        Chlorine-free, washable drawing and deep drawing oil.
        Machining of steels, also high-alloyed. Suitable for deep drawing of sheet, drawing of bars and profiles.
      • Drawing Oil-30 HS
        Chlorinated fine punching and deep-drawing oil for multi-stage drawn parts to 3 mm thickness, high-strength steels and non-ferrous metals, also suitable for machining alloy steels.
      • Drawing Oil-44 S
        Chlorinated drawing and cutting oil for noncutting metalforming operation of high strength materials.
        Extremely pressure resistant, separating sliding layer build-up.
      • Drawing Oil-66
        Chlorine-free special oil for drawing, stamping, and precision cutting.
        Machining of steels and high alloy, suitable for deep drawing of sheet, drawing of bars and profiles.
      • Drawing Oil-78 SW
        EP-drawing oil suitable for drawing, deep drawing, shear cutting and extrusion, drawing of steel and aluminum profiles, deep drawing steel sheets and aluminum sheets.
        Also suitable for copper and brass (pure or mixed with water up to 10%)
      • Drawing Oil-310 H
        Chlorine-free, washable drawing and deep drawing oil, no weld material under extreme pressure load drawing, deep drawing and extrusion. Molding of steel workpieces, particularly suitable for deep drawing steel sheets.
    • Copper / Brass

      Copper / Brass

      • Drawing Oil-30 HS
        Chlorinated fine punching and deep-drawing oil suitable for multi-stage drawn parts to 3 mm thickness of high-strength steels and non-ferrous metals, suitable for machining alloy steels.
      • Drawing Oil-78 SW
        EP-drawing oil suitable for drawing, deep drawing, shear cutting and extrusion, drawing of steel and aluminum profiles.
        Also suitable for copper and brass (pure or mixed with water up to 10%).
      • Drawing Oil-87 S
        Chlorine-free high-performance oil for drawing, cold forming of copper, brass and copper-nickel (fittings of 20-300 mm diameter).
      • Drawing Oil-406 S
        Chlorine-free, evaporating drawing oil for copper tubes for external lubrication and lubrication inside at final draw (blank glow without residue). Also suitable for copper tube drawing.
      • Drawing Oil-L 860 E/N
        Chlorine-free, pressure-resistant EP-drawing oil for massive cold forming.
        Suitable for tube drawing of copper, brass, aluminum.
        Vicosity at 40°C: approx. 1.300 mm²/s
      • Drawing Oil-L 871/I
        Chlorine-free, extremly pressure-resistant, high viscosity EP-drawing oil for massive cold forming.
        Suitable for tube drawing of copper, brass, aluminum.
        Vicosity at 40°C: approx. 2.600 mm²/s
    • Aluminium

      Aluminium

      • Drawing Oil-78 SW
        EP-drawing oil suitable for drawing, deep drawing, shear cutting and extrusion, drawing of steel and aluminum profiles.
      • Drawing Oil-87 S
        Chlorine-free high-performance oil for deep drawing and ironing of aluminium in thicknesses up to 1 mm.
      • Drawing Oil-L 860E
        Chlorine-free, pressure-resistant EP-drawing oil for massive cold forming.
        Suitable for tube drawing of copper, brass, aluminum.
        Viscosity at 40°C approx 1.300 mm²/s.